| SaniForce 2150 Pump |
| Maximum fluid working pressure |
120 psi ( 0.8 MPa, 8 bar ) |
| Air pressure operating range |
20 ~ 120 psi ( 0.14 ~ 0.8 MPa, 1.4 ~ 8 bar ) |
| Maximum air consumption |
175 scfm |
| Air consumption at 70psi / 80 gpm |
70 scfm |
| Maximum free flow delivery |
160 gpm ( 568 lpm ) |
| Maximum pump speed |
165 cpm |
| Gallons ( liters ) per cycle |
0.97 ( 3.67 ) |
| Maximum suction lift |
Wet: 29 ft ( 8.83 m )
Dry: 16 ft ( 4.87 m ) |
| Maximum size pumpable solids |
1/4” ( 6.3 mm ) |
| Maximum noise level at 100 psi, full flow |
95 dBa |
| Sound Power level |
102 dBa |
| Noise level at 70 psi and 50 cpm |
84 dBa |
| Maximum fluid operating temperature is based on the following maximum diaphragm, ball and seat temperature rating. |
PTFE: 220℉ ( 104.4℃ )
Santoprene: 180℉ ( 82.2℃ )
Polychloroprene: 200℉ ( 93℃ )
EPDM: 275℉ ( 135℃ )
Stainless steel: 250℉ ( 121.1℃ ) |
| Air inlet size |
0.5 inch npt (f) |
| Fluid inlet size, Models 24G743 and 24G744 ( for ram mounting ) |
4” sanitary flange |
| Fluid inlet size, All other models |
2.5” sanitary flange or 65 mm DIN 11851 |
| Fluid outlet size, Models 24G743 and 24G744 ( for ram mounting ) |
3” sanitary flange |
| Fluid outlet size, All other models |
2.5” sanitary flange or 65 mm DIN 11851 |
| Wetted parts, wetted materials on all models |
316 SST |
| Wetted parts, wetted material depending on model |
EPDM, Polychloroprene, PTFE, Santoprene |
| Non-wetted external parts |
300 series, stainless steel, aluminum ( A380 ), polyester ( labels ), LDPM foam ( gasket ) |
| Weight: |
FD3 models: 147 lb ( 66.7 kg )
FA3 models: 141 lb ( 64.0 kg ) |
| Size: |
|
