SaniForce 2150 Pump

SaniForce 2150 Pump
Maximum fluid working pressure	120 psi ( 0.8 MPa, 8 bar )
Air pressure operating range	20 ~ 120 psi ( 0.14 ~ 0.8 MPa, 1.4 ~ 8 bar )
Maximum air consumption	175 scfm
Air consumption at 70psi / 80 gpm	70 scfm
Maximum free flow delivery	160 gpm ( 568 lpm )
Maximum pump speed	165 cpm
Gallons ( liters ) per cycle	0.97 ( 3.67 )
Maximum suction lift	Wet: 29 ft ( 8.83 m ) Dry: 16 ft ( 4.87 m )
Maximum size pumpable solids	1/4” ( 6.3 mm )
Maximum noise level at 100 psi, full flow	95 dBa
Sound Power level	102 dBa
Noise level at 70 psi and 50 cpm	84 dBa
Maximum fluid operating temperature is based on the following maximum diaphragm, ball and seat temperature rating.	PTFE: 220℉ ( 104.4℃ ) Santoprene: 180℉ ( 82.2℃ ) Polychloroprene: 200℉ ( 93℃ ) EPDM: 275℉ ( 135℃ ) Stainless steel: 250℉ ( 121.1℃ )
Air inlet size	0.5 inch npt (f)
Fluid inlet size, Models 24G743 and 24G744 ( for ram mounting )	4” sanitary flange
Fluid inlet size, All other models	2.5” sanitary flange or 65 mm DIN 11851
Fluid outlet size, Models 24G743 and 24G744 ( for ram mounting )	3” sanitary flange
Fluid outlet size, All other models	2.5” sanitary flange or 65 mm DIN 11851
Wetted parts, wetted materials on all models	316 SST
Wetted parts, wetted material depending on model	EPDM, Polychloroprene, PTFE, Santoprene
Non-wetted external parts	300 series, stainless steel, aluminum ( A380 ), polyester ( labels ), LDPM foam ( gasket )
Weight:	FD3 models: 147 lb ( 66.7 kg ) FA3 models: 141 lb ( 64.0 kg )
Size:

SaniForce 2150:

Other products / Other products