| SaniForce 1590 Pump |
| Maximum fluid working pressure |
120 psi ( 0.8 MPa, 8 bar ) |
| Air pressure operating range |
20 ~ 120 psi ( 0.14 ~ 0.8 MPa, 1.4 ~ 8 bar ) |
| Maximum air consumption |
130 scfm |
| Air consumption at 70 psi / 50 gpm |
42 scfm |
| Maximum free flow delivery |
100 gpm ( 379 liter / min. ) |
| Maximum pump speed |
200 cpm |
| Gallons ( liters ) per cycle |
0.5 ( 1.9 ) |
| Maximum suction lift |
Wet: 29 ft ( 8.83 m )
Dry: 14 ft ( 4.26 m ) |
| Maximum size pumpable solids |
3/16” ( 4.8 mm ) |
| Maximum noise level at 100psi, full flow |
88 dBa |
| Sound power level |
95 dBa |
| Noise level at 70psi and 50 cpm |
79 dBa |
| Maximum fluid operating temperature is based on the following maximum diaphragm, ball and seat temperature rating. |
PTFE: 220℉ ( 104.4℃ )
Santoprene: 180℉ ( 82.2 ℃ )
Polychloroprene: 200℉( 93 ℃ )
EPDM: 275℉ ( 135℃ )
Stainless steel: 250℉ ( 121.1℃ ) |
| Air inlet size |
0.5 inch npt (f) |
| Fluid inlet size |
2” sanitary flange or 50 mm DIN 11851 |
| Fluid outlet size |
2” sanitary flange or 50 mm DIN 11851 |
| Wetted parts, wetted materials on all models |
316 SST |
| Wetted parts, wetted material, depending on the model |
EPDM, Polychloroprene, PTFE, Santoprene |
| Non-wetted external parts |
300 series stainless steel, aluminum ( A380 ), polyester ( labels ), LDPE foam ( gasket ) |
| Weight |
FD2 models: 89 lb ( 40.3 kg )
FA2 models: 83 lb ( 37.6 kg ) |
| Size |
|
