SaniForce HS 1590 Pump |
Maximum fluid working pressure |
120 psi ( 0.8 MPa, 8 bar ) |
Air pressure operating range |
20 ~ 120 psi ( 0.14 ~ 0.8 MPa, 1.4 ~ 8 bar ) |
Maximum air consumption |
125 scfm |
Air consumption at 70 psi air inlet pressure / 60 gpm |
50 scfm |
Maximum free flow delivery |
100 gpm ( 378.5 liter / min. ) |
Maximum pump speed |
200 cpm |
Gallons ( liters ) per cycle |
0.5 ( 1.96 ) |
Maximum suction lift |
Wet: 28 ft ( 8.5 m )
Dry: 15 ft ( 4.57 m ) |
Maximum size pumpable solids |
5/8” ( 15.9 mm ) |
Maximum noise level at 100 psi, full flow |
90 dBa |
Sound power level |
103 dBa |
Noise level at 70 psi and 50 cpm |
85 dBa |
Maximum fluid operating temperature is based on the following maximum diaphragm, ball and seat temperature ratings. |
PTFE balls; PTFE/ EPDM 2pcs diaphragm: 220℉ ( 104.4℃ )
PTFE/ EPDM overmolded ( HD ) diaphragm: 180℉ ( 82.2℃ )
Santoprene balls or diaphragm: 180℉ ( 82.2℃ )
3A Approved EPDM Overmolded diaphragm: 275℉ ( 135℃ ) |
Air inlet size |
0.5 inch npt (f) |
Wetted materials on all models |
316 SST, 3A Approved EPDM, PTFE |
Wetted material depending on model |
Santoprene, 3A Approved EPDM, PTFE |
Non-wetted external parts |
300 series stainless steel, polyester ( label ) , LDPE foam ( gasket ) |
Weight |
97 lb ( 44 kg ) |
Size |
|
SaniForce 1590 HS Ball Pumps:
P/N |
Type |
Inlet |
Ball |
Diaphragm |
Remark |
SBBAAA |
Ball |
2 in x 2 in |
PTFE |
Overmolded EPDM |
|
SBBA11 |
Ball |
2 in x 2 in |
PTFE |
PTFE |
|
SABA13 |
Ball |
2 in x 2 in |
PTFE |
Overmolded PTFE |
Includes leak detector |
SBBA13 |
Ball |
2 in x 2 in |
PTFE |
Overmolded PTFE |
|
SBBA22 |
Ball |
2 in x 2 in |
Santoprene |
Santoprene |
|