SaniForce 1590 HS Ball Pumps

SaniForce HS 1590 Pump
Maximum fluid working pressure	120 psi ( 0.8 MPa, 8 bar )
Air pressure operating range	20 ~ 120 psi ( 0.14 ~ 0.8 MPa, 1.4 ~ 8 bar )
Maximum air consumption	125 scfm
Air consumption at 70 psi air inlet pressure / 60 gpm	50 scfm
Maximum free flow delivery	100 gpm ( 378.5 liter / min. )
Maximum pump speed	200 cpm
Gallons ( liters ) per cycle	0.5 ( 1.96 )
Maximum suction lift	Wet: 28 ft ( 8.5 m ) Dry: 15 ft ( 4.57 m )
Maximum size pumpable solids	5/8” ( 15.9 mm )
Maximum noise level at 100 psi, full flow	90 dBa
Sound power level	103 dBa
Noise level at 70 psi and 50 cpm	85 dBa
Maximum fluid operating temperature is based on the following maximum diaphragm, ball and seat temperature ratings.	PTFE balls; PTFE/ EPDM 2pcs diaphragm: 220℉ ( 104.4℃ ) PTFE/ EPDM overmolded ( HD ) diaphragm: 180℉ ( 82.2℃ ) Santoprene balls or diaphragm: 180℉ ( 82.2℃ ) 3A Approved EPDM Overmolded diaphragm: 275℉ ( 135℃ )
Air inlet size	0.5 inch npt (f)
Wetted materials on all models	316 SST, 3A Approved EPDM, PTFE
Wetted material depending on model	Santoprene, 3A Approved EPDM, PTFE
Non-wetted external parts	300 series stainless steel, polyester ( label ) , LDPE foam ( gasket )
Weight	97 lb ( 44 kg )
Size

SaniForce 1590 HS Ball Pumps:

Other products / Other products