| Husky 205 Plastic Pump |
| Maximum fluid working pressure |
100psi ( 7 bar ) |
| Maximum / minimum air pressure |
100psi / 20 psi ( 7 bar ) ( 1.4 bar ) |
| Maximum fluid flow |
5.0 gpm ( 18.9 lpm ) |
| Maximum pump speed |
Dry: 320 cycles per minute
Wet: 250 cycles per minute |
| Volume per stroke |
0.006 gal ( 23 cc ) |
| Volume per cycle |
0.012 gal ( 46 cc ) |
| Maximum suction lift |
Dry: 8 to 10 ft ( 2.5 to 3 m ) |
| Maximum size pumpable solids |
0.06 inch ( 1.5 mm ) |
| Maximum operating temperature |
180℉ ( 82 ℃ ) |
| Maximum air consumption |
9.0 scfm ( 0.252 m3/ min. ) |
| Air inlet size |
1/4 npt(f) / 1/4 bsp(f) |
| Fluid inlet size |
1/4 npt(f) / 1/4 bsp(f) |
| Fluid outlet size |
1/4 npt(f) / 1/4 bsp(f) |
| Air exhaust port size |
1/4 npt(f) / 1/4 bsp(f) |
| Weight |
Polypropylene pump: 2.0 lb ( 0.9 kg )
Acetal pump: 2.5 lb ( 1.1 kg )
Kynar: 2.8 lb ( 1.3 kg ) |
| Size |
|
| Wetted parts ( housing, diaphragms, check valves ) |
Polypropylene pump: Glass-filed polypropylene, Teflon, Polypropylene.
Acetal pump: Acetal with SST fiber, Teflon, acteal.
Kynar pump: kynar, Teflon. |
| Elastomer options |
Teflon，Acetal，PVDF |
