Other products / Other products
Husky 205 Plastic Pumps
Specification
| Husky 205 Plastic Pump | |
| Maximum fluid working pressure | 100psi ( 7 bar ) |
| Maximum / minimum air pressure | 100psi / 20 psi ( 7 bar ) ( 1.4 bar ) |
| Maximum fluid flow | 5.0 gpm ( 18.9 lpm ) |
| Maximum pump speed | Dry: 320 cycles per minute Wet: 250 cycles per minute |
| Volume per stroke | 0.006 gal ( 23 cc ) |
| Volume per cycle | 0.012 gal ( 46 cc ) |
| Maximum suction lift | Dry: 8 to 10 ft ( 2.5 to 3 m ) |
| Maximum size pumpable solids | 0.06 inch ( 1.5 mm ) |
| Maximum operating temperature | 180℉ ( 82 ℃ ) |
| Maximum air consumption | 9.0 scfm ( 0.252 m3/ min. ) |
| Air inlet size | 1/4 npt(f) / 1/4 bsp(f) |
| Fluid inlet size | 1/4 npt(f) / 1/4 bsp(f) |
| Fluid outlet size | 1/4 npt(f) / 1/4 bsp(f) |
| Air exhaust port size | 1/4 npt(f) / 1/4 bsp(f) |
| Weight | Polypropylene pump: 2.0 lb ( 0.9 kg ) Acetal pump: 2.5 lb ( 1.1 kg ) Kynar: 2.8 lb ( 1.3 kg ) |
| Size | |
| Wetted parts ( housing, diaphragms, check valves ) | Polypropylene pump: Glass-filed polypropylene, Teflon, Polypropylene. Acetal pump: Acetal with SST fiber, Teflon, acteal. Kynar pump: kynar, Teflon. |
| Elastomer options | Teflon，Acetal，PVDF |
Husky 205 Plastic Pumps:
| Material | P/N ( NPT Ported ) | P/N ( NPT Ported ) | P/N ( BSP Ported ) | P/N ( BSP Ported ) | Material for Check Valves | Material for Diaphragms |
| Standard Air Valve | Remote Air Valve | Standard Air Valve | Remote Air Valve | |||
| Acetal | D11021 | D21021 | D11021 | D21021 | Acetal | PTFE |
| Acetal | D11026 | D21026 | D11026 | D21026 | Acetal | Santoprene |
| PVDF | D150A1 | D250A1 | D150A1 | D250A1 | PVDF | PTFE |
| PVDF | D150A6 | D250A6 | D150A6 | D250A6 | PVDF | Santoprene |
| PP | D12091 | D22091 | D12091 | D22091 | PP | PTFE |
| PP | D12096 | D22096 | D12096 | D22096 | PP | Santoprene |
Performance Charts
Dimensions
