| Husky 15120 Plastic Pump |
| Maximum fluid working pressure |
125 psi ( 8.6 bar ) |
| Air pressure operating range |
20 ~ 125 psi ( 1.4 ~ 8.6 bar ) |
| Air inlet size |
1/2” npt (f) |
| Air exhaust size |
1” |
| Fluid inlet and outlet size ( ANSI / DIN flange ) |
1.5 inch ( 38 mm ) |
| Maximum suction lift ( reduce if balls don’t seat well due to damage balls or seat, lightweight balls, or extreme speed of cycling ) |
Wet: 31 ft ( 9.4 m )
Dry: 16 ft ( 4.9 m ) |
| Maximum size pump solids |
1/4” ( 6.3 mm ) |
| Minimum ambient air temperature for operation and storage. NOTE: Exposure to extreme low temperatures may result in damage to plastic parts. |
32℉ ( 0 ℃ ) |
| Air consumption |
43 scfm at 70psi, 60 gpm ( 1.2 m3/ min. at 0.48 MPa, 4.8 bar ; 227 lpm ) |
| Maximum Air consumption |
85 scfm ( 2.4 m3/ min. ) |
| Fluid flow per cycle ( 1pcs bolt through diaphragms ) |
0.63 gallons ( 2.4 liters ) |
| Fluid flow per cycle ( 2pcs bolt through diaphragms ) |
0.66 gallons ( 2.5 liters ) |
| Fluid flow per cycle ( Overmolded diaphragms ) |
0.59 gallons ( 2.3 liters ) |
| Maximum free flow delivery (1pcs bolt through diaphragms ) |
122 gpm ( 462 lpm ) |
| Maximum free flow delivery ( 2pcs bolt through diaphragms ) |
120 gpm ( 454 lpm ) |
| Maximum free flow delivery ( Overmolded diaphragms ) |
115 gpm ( 435 lpm ) |
| Maximum pump speed (1pcs bolt through diaphragms ) |
192 cycle per minute |
| Maximum pump speed ( 2pcs bolt through diaphragms ) |
183 cycle per minute |
| Maximum pump speed ( Overmolded diaphragms ) |
195 cycle per minute |
| Weight |
Polypropylene: 57 lb ( 25.9 kg )
PVDF: 74 lb ( 33.6 kg ) |
| Size |
|
| Wetted parts |
Wetted parts include materials chosen for seat, ball and diaphragm options, plus the pump material of construction: Polypropylene or PVDF |
| None wetted external parts |
Stainless steel, polypropylene |
