SaniForce 515 pump

SaniForce 515 Pump
Maximum fluid working pressure	100 psi ( 0.7 MPa, 7 bar )
Air pressure operating range	20 ~ 100 psi ( 0.14 ~ 0.7 MPa, 1.4 ~ 7 bar )
Maximum air consumption	28 scfm ( 0.8 m3/ minute )
Air consumption at 70psi / 20 gpm	18 scfm ( 0.5 m3/ minute )
Maximum free flow delivery	16 gpm ( 61 liter / minute )
Recommended cycle rate for continuous duty	182 cycles per minute
Maximum size pumpable solids	3/32 inch ( 2.4 mm )
Maximum viscosity	10,000 cps
Environmental temperature range	40℉~120℉ ( 4℃ ~ 49℃ )
Minimum fluid temperature	40℉ ( 4 ℃ )
Maximum fluid operating temperature	PTFE: 220℉ ( 104.4℃ ) Santoprene: 180℉ ( 82.2℃ ) EPDM: 275℉ ( 135℃ ) Stainless steel: 250℉ ( 121.1℃ )
Maximum suction lift	Dry: 15 ft ( 4.6 meters ) Wet: 25 ft ( 7.6 meters )
Maximum pump speed	Standard diaphragms: 400 cycles per minute. Overmolded diaphragms: 500 cycles per minute.
Fluid flow per cycle	Standard diaphragms: 0.04 gallons ( 0.14 liters ) Overmolded diaphragms: 0.03 gallons ( 0.11 liters )
Maximum sound pressure	78 dBa, at 70 psi ( 0.48 MPa, 4.8 bar )
Air inlet size	1/4” npt (f)
Air exhaust port size	3/8” npt (f)
Fluid inlet size	1.5 inch sanitary flange
Fluid outlet size	1.5 inch sanitary flange
Wetted material on all models	316 S.S.
Wetted material depending on models	EPDM, PTFE, Santoprene
Non-wetted external parts	300 series stainless steel, FDA-compliant polypropylene, Polyester (labels)
Weight	23 lb ( 10 kg )
Size

SaniForce 515:

Other products / Other products