Other products / Other products
Husky 3300 Plastic Pumps
Specification
| Husky 3300 Plastic Pump | |
| Maximum fluid working pressure, Polypropylene or stainless steel with polypropylene center section | 100 psi ( 7 bar ) |
| Air pressure operating range, Polypropylene or stainless steel with polypropylene center section | 20 ~ 100 psi ( 1.4 ~ 7 bar ) |
| Air consumption, All pumps | 90 scfm at 70 psi, 100 gpm ( 2.5 m3/ min. at 4.8 bar, 379 lpm ) |
| Maximum air consumption, Polypropylene or stainless steel with polypropylene center section | 275 scfm ( 7.8 m3/ min. ) |
| Maximum free-flow delivery, standard diaphragm | 300 gpm at 125 psi ( 1135 lpm at 8.6 bar ) |
| Maximum free-flow delivery, standard diaphragm | 280 gpm at 100 psi ( 1059 lpm at 7 bar ) |
| Maximum free-flow delivery, overmolded diaphragm | 270 gpm at 125 psi ( 1022 lpm at 8.6 bar ) |
| Maximum free-flow delivery, overmolded diaphragm | 260 gpm at 100 psi ( 984 lpm at 7 bar ) |
| Maximum pump speed, standard diaphragm | 103 cpm at 125 psi ( 103 cpm at 8.6 bar ) |
| Maximum pump speed, standard diaphragm | 97 cpm at 100 psi ( 97 cpm at 7 bar ) |
| Maximum pump speed, overmolded diaphragm | 135 cpm at 125 psi ( 135 cpm at 8.6 bar ) |
| Maximum pump speed, overmolded diaphragm | 130 cpm at 100 psi ( 130 cpm at 7 bar ) |
| Maximum suction lift | Dry: 16 ft ( 4.9 meters ) Wet: 31 ft ( 9.4 meters ) |
| Recommend cycle rate for continuous duty | 35 ~ 50 cpm |
| Recommend cycle rate for circulation systems | 20 cpm |
| Maximum size pumpable solids | 1/2” ( 13 mm ) |
| Fluid flow per cycle, standard diaphragm | 2.9 gal ( 11.01 liter ) |
| Fluid flow per cycle, standard diaphragm | 2.0 gal ( 7.6 liter ) |
| Ambient temperature, minimum ambient air temperature for operation and storage | 32℉ ( 0 ℃ ) |
| Fluid inlet - Polypropylene | 3” ANSI / DIN flange |
| Air inlet – all pumps | 3/4” npt (f) |
| Wetted parts – all pumps | Materials chosen for seat, ball, and diaphragm options, plus the pump material of construction – aluminum, polypropylene, or stainless steel. Aluminum pumps also have carbon coated steel. |
| Non-wetted external parts polypropylene | Stainless steel, Polypropylene |
| Weight | Polypropylene: 200 lb ( 91 kg ) |
| Size | |
Husky 3300 Plastic Pumps:
| Material | P/N | Materials for Seats | Materials for Balls | Materials for Diaphragms |
| PP | 652404 | PP | PTFE | 2pcs PTFE |
| PP | 652400 | PP | Santoprene | Santoprene |
| PP | 652423 | Santoprene | Santoprene | Santoprene |
| PP | 652414 | SST | PTFE | 2pcs PTFE |
| PP | 652402 | PP | FKM | FKM |
Performance Charts
.jpg)
Dimensions
.jpg)
Typical System Drawings
