APM cartridge filter housing - TKH series

304L or 316L stainless steel construction for best chemical compatibility and corrosion resistance.
Low pressure drops, high filtration efficiency.
Electro-polished external housing for superior finish. Easy access for housings cleaning or cartridges change-out, and no tools needed!
Lid o-ring sealing between the cover and the housing, preventing liquid leakage.
Cartridge hold down plate and v-posts assure alignment and positive seal for cartridges.
Seat cups accept 222 double open end or single open end cartridges.
Multiple pressure ratings available.

Typical types of fluids handled:
Water, sludge and slurry, chemical, adhesive, dyeing aides, painting, coating, solvents inks, resins, mechanical oils, food & beverage, juice, wine, fats and oils, syrup, domestic drainage, and pharmaceuticals.

APM Cartridge Filter Housings – TKH Series:

Features:

• Swing bolts with eyenut closure design.

• Pressure rating 150psi (10kg/cm2).

• Accept 5 or 7 sized cartridges, in 10”, 20”, 30”, or 40” lengths.

• 1-1/2” or 2” thread or flanged inlet outlet as standard.

• Side inlet and outlet as standard. Other configurations are also available.

• Standard models and custom designs available.

 

Options:

• Steam Jacket.

• Internal housing surface treatment.

Model	Material	Standard Inlet/Outlet	Flow Range	Cartridge Length & No.	Pressure Rating
APM-TK5H	SUS304 SUS316	1 1/2”	0-25 gpm	10”x5	150psi(10kg/cm2)
APM-TK10H	SUS304 SUS316	1 1/2”	0-50 gpm	20”x5	150psi(10kg/cm2)
APM-TK15H	SUS304 SUS316	1 1/2”	0-75 gpm	30”x5	150psi(10kg/cm2)
APM-TK20H	SUS304 SUS316	1 1/2”	0-100 gpm	40”x5	150psi(10kg/cm2)
APM-TK7H	SUS304 SUS316	2”	0-35 gpm	10”x7	150psi(10kg/cm2)
APM-TK14H	SUS304 SUS316	2”	0-70 gpm	20”x7	150psi(10kg/cm2)
APM-TK21H	SUS304 SUS316	2”	0-105 gmp	30”x7	150psi(10kg/cm2)
APM-TK28H	SUS304 SUS316	2”	0-140 gpm	40”x7	150psi(10kg/cm2)