Husky 2200 Plastic Pump

Husky 2200 Plastic Pump
Maximum fluid working pressure	125 psi ( 8.6 bar )
Air pressure operating range	20 to 125 psi ( 1.4 to 8.6 bar )
Air inlet size	3/4 npt (f)
Air exhaust size	1” npt (f)
Fluid inlet and outlet size ( ANSI / DIN flange )	2” ( 50 mm )
Maximum suction lift	Wet: 31 ft ( 9.4 m ) Dry: 16 ft ( 4.9 m )
Maximum size pumpable solids	3/8” ( 9.5 mm )
Minimum ambient air temperature for operation and storage	32℉ ( 0℃ )
Air consumption, standard diaphragms	70 scfm at 70 psi, 100 gpm ( 2.0 m3/ min. at 0.48 MPa, 4.8 bar, 379 lpm )
Air consumption, overmolded diaphragms	75 scfm at 70 psi, 100 gpm ( 2.1 m3/ min. at 0.48 MPa, 4.8 bar, 379 lpm )
Maximum air consumption, standard diaphragms	140 scfm ( 4.0 m3/ min. )
Maximum air consumption, overmolded diaphragms	157 scfm ( 4.4 m3/ min. )
Fluid flow per cycle, standard diaphragms	1.6 gallons ( 6.1 liters )
Fluid flow per cycle, overmolded diaphragms	1.3 gallons ( 4.9 liters )
Maximum free flow delivery standard diaphragms	200 gpm ( 757 lpm )
Maximum free flow delivery overmolded diaphragms	200 gpm ( 757 lpm )
Maximum pump speed, standard diaphragm	125 cycles per minutes
Maximum pump speed, overmolded diaphragam	155 cycles per minutes
Weight	Polypropylene: 80 lb ( 36.3 kg ) PVDF: 106 lb ( 48.1 kg )
Size
Wetted parts	Wetted parts include materials chosen for seat, ball and diaphragm options, plus the pump’s material of constructions: Polypropylene, or PVDF
Non-wetted external parts	Stainless steel, Polypropylene

Husky plastic 2200:

Other products / Other products